How to Install MediaTek Preloader USB VCOM Port Driver on Windows 7
If you have a MediaTek-powered Android device and want to flash firmware or custom binaries using the SP Flash Tool, you will need to install the MediaTek Preloader USB VCOM Port Driver on your Windows 7 PC. This driver allows your PC to recognize the device's Preloader, which is responsible for the boot process and can also act as an interface to download/flash firmware files to the device's memory. In this article, we will show you how to download and install the MediaTek Preloader USB VCOM Port Driver on Windows 7 using two different methods: automatic and manual.
Method 1: Automatic Installation
This method is easier and does not require you to disable the Windows driver signature verification. You just need to run the setup wizard and follow the on-screen instructions. Here are the steps:
mediatek preloader usb vcom port driver windows 7 17
Download the ZIP package of the MediaTek Preloader USB VCOM Port Driver from here.[^1^]
Extract the contents of the ZIP file using an archive utility like 7-Zip.
Double-click on the \"MediaTek_Preloader_USB_VCOM_Drivers.exe\" executable file.
Click \"Next\" on the welcome screen.
Select \"I accept the terms in the license agreement\" and click \"Next\".
Choose the installation folder and click \"Next\".
Click \"Install\" to begin the installation process.
Wait for the installation to complete and click \"Finish\".
Restart your PC for the changes to take effect.
You have successfully installed the MediaTek Preloader USB VCOM Port Driver on your Windows 7 PC using the automatic method.
Method 2: Manual Installation
This method requires you to manually add the driver file to your PC via the Device Manager. You will also need to disable the Windows driver signature verification before proceeding with this method. Here are the steps:
Download the ZIP package of the MediaTek Preloader USB VCOM Port Driver from here.[^2^]
Extract the contents of the ZIP file using an archive utility like 7-Zip.
Go to Start > Run and type \"shutdown.exe /r /o /f /t 00\" (without quotes) and press Enter. This will restart your PC into Advanced Boot Options.
Select \"Troubleshoot\" > \"Advanced options\" > \"Startup Settings\" > \"Restart\".
Press F7 to disable driver signature enforcement.
Your PC will reboot and load Windows normally.
Go to Start > Control Panel > Device Manager.
Connect your MediaTek-powered Android device to your PC via a USB cable.
You should see a yellow exclamation mark next to an unknown device under \"Ports (COM & LPT)\". Right-click on it and select \"Update Driver Software\".
Select \"Browse my computer for driver software\".
Select \"Let me pick from a list of device drivers on my computer\".
Select \"Show All Devices\" and click \"Next\".
Click \"Have Disk\" and browse to the folder where you extracted the driver files.
Select the appropriate driver file according to your device's chipset (MT65xx, MT67xx, or MT68xx) and click \"Open\".
Click \"OK\" and then click \"Next\".
If you see a warning message, click \"Install this driver software anyway\".
Wait for the installation to complete and click \"Close\".
You have successfully installed the MediaTek Preloader USB VCOM Port Driver on your Windows 7 PC using the manual method.
0efd9a6b88
https://www.alasf.com.br/group/avisos-da-alasf/discussion/e02db86e-95d6-4a02-bcc5-8fc50858bcaf